The latest addition!!!

g5-blog-2

For now, this is a placeholder. Mine was assembled, and once I was ready to get the pitch ranges knocked out and blades tracked, I found that the motor is shorting out…NOT GOOD!

When I bought it, it was pre-assembled, but only for a display. I had to reverse some stuff, and stall a few small things, and adjust the head. I got everything ready, and once I finally finred it up, the motor started glitching. I dropped it back to a 3-cell battery (this one is a 6-cell…22v system) and tried a different motor. Works fine. ramped it back up to the 6-cell system and the motor still worked. The stock motor was fried, so I contacted my buddy and the new motor should be here on Tuesday, then I’ll be in the air.

The specs on this pony are:

  • Length: 620mm
  • Height : 210mm including head button
  • Main Rotor Diameter: 775mm
  • Tail Rotor Diameter: 157mm
  • Blade Length: 350mm
  • Main Gear: 150T
  • Auto Rotation: 106T
  • Tail Drive Gear: 25T
  • Pinion Gear: 11T
  • Flying Weight 780-850 Grams
  • Black plastic tail blades
  • White fiberglass 350mm main blades (Rotortech 350mm shown in pic are in storage)
  • Painted fiberglass canopy (Different than the above pic)
  • Black G10 fiberglass frame and landing gear and fin set

The motor included is the Outrage 1700kV upgrade, and a HobbyWing Pentium 40A. Nice high capacity ESC, even though the max amp draw is around 20A.

Mine has Hitec HS-65MG servos on the cyclic, and a S9157 digital on the tail with the new ATV-enabled heading hold Telebee/Zoom gyro. So far, I’ve got the gyro set up to avoid drifing, and regardless of the temperature it has yet to drift. Looks like my old one is going to be replaced.

It also included a new charger for the 6-cell battery…Maxpro X6. Instead of charging through the balance connectors, it charges through the main Deans, and uses the balances for monitoring. It’s not a fully automatic system. It can detect how many cells it is, but you have to manually put what type and the capacity. The good thing though, is that it can do LiPo, Li-Ion, Ni-MH, Ni-Cd, and Lead (car batteries). It works on all of them.

Now, I just need to get that motor in and start having some fun.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: